ACP - ACPF Highway & Municipal Severe Service Wing Systems

Modular concept for easy removal and installation.
Choice of front slide lift cable or direct lift action.
High lift front & rear posts or fixed rear power selector.
Severe service wing braces and wing arm cylinders.
Cushion valve protection.
Highway high speed leveling capabilities as well as widening operations.
Choice of wing sizes.
Power-tilt hitch and front posts for easy access to the engine compartment, hydraulically.
Fixed rear tower patrol system "ACPF" option.
Open style tower "ACPO" option.

Everest - Wing Blades

Everest conventional wing blades are available in cutting edge lengths up to 13 feet.
Everest trip edge wing blades are ideal for down to pavement operations where ground contact is continuous.
A full trip mechanism is standard on all Everest patrol wings and optional on traditional series.

Everest - ACC Modular Side Wing System

The ACC wing system is modular for quick and easy installation and removal.
The ACC wing system is designed for severe duty and offers all traditional wing functions including optional "HIGH-RISE" capabilities.  A proven modern concept that offers reliability, durability and ease of service.
Power tilt hitch and front posts when matched with Everest "PT" hitch for full access to the engine compartment, hydraulically.
"HCC Tower" features fixed sheve assembly; no movement above tower top for greater safety. Open type cabinet with wrap around beam for strength. Cylinder mounted behind beam for greater protection.  Bolt-on construction support brackets.  Optional Trip-D Safety-trip for wing.

Everest - ACPL Side Wing Systems for Light Trucks

Designed for one ton or larger light trucks, the Everest patrol wing systems turns a light truck into a fast and maneuverable snow machine that can move snow as it accumulates and be ready for quick clean-ups after the storm.  The UHMW polymer moldboard is light and tough. A perfect match for Everest "RLTE" polymer plows.

Everest - ACX Traditional Side Wing System

Full 8" I-Beam front post.
12" rear cabinet module.
Fully enclosed rear tower.
Severe duty pulleys and cables.
Protected hydraulic cylinders.
Heavy duty wing braces.

Everest - OWSK Series One Way Snowplow

One-piece moldboard.
Break formed skin plate.
Tubular push frame
Exceptional performance value.
Available in low or high discharge.
Heavy duty tubular sector.
Attack angle positioning tube.
Tension trip mechanism gives instant trip action to minimize shock stresses on truck and driver.
Adjustable cast runner shoes.
Spring tension adjusters.
Oscillator bar adjusts plow articulation to road contour.
Standard hitch pin spacing.
Heavy duty lift chains
High strength; low weight design.
Wear shoes, cutting edges and plow accesories available from Valley Fab and Equipment.

Everest - RTE Reversible Plows. Heavy Duty "Trip Edge" Series

Four moldboard attach points.
Over 100" drive span.
More than twice as strong with structural tube main member.
Accepts hydraulic cylinder, gear and manual reverse kits.
Snow deflector.
Caster shoes or wheels.
Cushion relief valve kit.
Rubber or polyurethane cutting edges.

Everest - RM Series for Metropolitan Plowing

Minimum weight to assist maneuverability.
Low height for good driver visibility, 32" or 36".
Continuous duty high speed power angling
Dual cylinders reverse.
Snow shield curvature.
Torsion spring trip edge.
Steel or polymer mold board skin.
Utilized drive frame.
Designed for demanding municipal highway use
Available dual punched to accept 8" or 12" cutting edge bolt patterns.

Everest - RTM Reversible Snow Plows, Heavy Duty "Trip Moldboard" Series

Built in flexible snow shield.
Paneled break formed 10 gauge moldboard has greater rigidity and better snow deflection capability. Optional 3/8" poly moldboard.
Heavy duty 3 1/2" tension springs of 5/8" wire provide reliable action.
10 flame cut 3/8" ribs insure maximum moldboard skin support for severe plowing conditions while providing positive attachment for the 4 plated trip pins.
The 1/2" X 8" high carbon cutting edge reversible for longer wear.. Wrap around curb shoes are optional.
A cross over relief cushion valve option protects the angling cylinders from shock loads.
Plow hitching pins are on 31" centers and attached to heavy duty oscillator bar allowing the plow to adjust automatically to road contours.
A heavy duty "A" frame and secor assures stable angling. Manually adjustable or hydraulic powered cylinder or worm gear.
Twin power angling cylinders provide 0 to 35 degrees of rotation and maximum holding power and reliability.
Formed reinforced sector module has a wide stance and coupled to the tubular front member provides superior resistance to torsion and impact.
The 6" X 4" X 5/8" backer angle is reinforced with gussets and fitted with 2 moldboard shoes.
Curb shoes are standard.

Everest - The "SNOW-MAX" Series of Snow Pushers

The EVEREST "SNO-MAX" Snow Pusher is capable of converting your everyday loader into a highly effective snow clearing machine.  Simply drive your loader into the structural adapters, attach two chains with standard chain binders and you are ready to move snow.  The "SNO-MAX" is equipped with a Rubber Blade to clean the path and T-1 Running Shoes at each end of the plow to prevent damage.

Available Models are the "SNOW-MAX" 12", 14", 16", 18" and 20"

For more information regarding our snow removal products, contact us by email at sales@vfabe.com.